home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 21
/
Cream of the Crop 21 (Terry Blount) (October 1996).iso
/
windows
/
95cbw170.zip
/
README.TXT
< prev
next >
Wrap
Text File
|
1996-07-07
|
5KB
|
161 lines
Colorado Backup for Windows 95 1.70 Release
June 10, 1996
This document contains important information about network
backups:
- Novell 2.x - 3.x network backup
- Novell 4.x network backup
- Windows95 network/Windows for Workgroups network backup
- Windows NT network backup
It also includes the following information:
- Special note about the HP Colorado T3000 tape drive
- Installing external HP Colorado tape drives
- Power-Management (GREEN) Computers
Please contact our QICFAX service for the latest information
regarding our products. QICFAX phone numbers are listed in
the back of your Colorado Backup manual.
NOVELL 2.x - 3.x NETWORK BACKUP
To backup Novell 2.x - 3.x servers, use either:
- Colorado Backup for DOS
(reboot from DOS)
or
- Colorado Backup for Windows
(reboot to DOS, then Windows 3.x)
*DO NOT USE* Colorado Backup for Windows 95 to
back up a Novell 2.x or 3.x server.
To back up Win95 workstations, use Microsoft's Windows
95 built-in Cheyenne ARCserve Client software (if the
appropriate server application is installed on the server).
See QICFAX document #2421 for more information.
See +++ note below.
NOVELL 4.x NETWORK BACKUP
Your Colorado PowerDAT or PowerTape (SCSI) tape drive
must be installed on the server. IDE tape drives are
not supported on the server.
To back up Novell 4.x servers, use NLM software.
To back up Win95 workstations, use Microsoft's Windows
95 built-in Cheyenne ARCserve Client software (if the
appropriate server application is installed on the server).
See QICFAX document #2421 for more information.
*DO NOT USE* Colorado Backup for DOS, Colorado Backup
for Windows (Windows 3.x), or Colorado Backup for
Windows 95 to backup a Novell 4.x server.
See +++ note below.
WINDOWS 95 NETWORK BACKUP
WINDOWS FOR WORKGROUPS NETWORK BACKUP
Colorado Backup for Windows 95 (CBW95) supports
Win95 Network and Windows for Workgroups networks.
IMPORTANT: CBW95 will back up *ONLY* the Win95 registry
of the PC to which the tape drive is attached; the Win95
registry of a remote PC will not be backed up.
REMEMBER: Certain Windows 95 system files will always
appear "in use."
See +++ note below.
WINDOWS NT NETWORK BACKUP
Your Colorado PowerDAT or PowerTape (SCSI) tape drive
must be installed on the server.
To back up NT servers, use Microsoft's built-in Windows
NT drivers or appropriate 3rd party software.
See QICFAX document #5225 for more information.
To backup Win95 workstations, use Microsoft's Windows
95 built-in Arcada Backup Exec Client for NT software
(if the appropriate server application is installed on
the server). See QICFAX document #2421 for more infor-
mation.
See +++ note below.
------------------------------------------------------------
+++ NOTE:
Currently, there are no plans to include additional
network support in future versions of Colorado Backup for
Windows 95 software.
------------------------------------------------------------
SPECIAL NOTE ABOUT THE HP COLORADO T3000 TAPE DRIVE
Your HP Colorado T3000 tape drive is designed to work with a
1 Mbit/sec or faster native floppy controller.
If your computerÆs floppy controller runs at 500 Kbit/sec
or you want to run your drive at 2 Mbit/sec, you must
purchase an FC-20 Tape Drive Controller Board. Call Customer
Support for more information. (See the T3000 Installation
Guide for telephone numbers.)
INSTALLING EXTERNAL HP COLORADO TAPE DRIVES
If you attach your external tape drive with Colorado Backup
already open, the drive may not be detected. Simply close the
Colorado Backup program and start it again to detect the drive.
HP Colorado T1000e in Windows 95....
If you are still having problems after trying the above:
1. Turn your computer off.
2. Turn your computer on.
3. Install the T1000e's data cable.
4. Install the T1000e's power cable.
5. Insert a tape into the drive.
6. Follow the Installation Guide's directions for Installing
the Software.
If you are having problems:
A. Click the Uninstall icon.
B. Right-click on the My Computer icon.
C. Click the Device Manager tab.
D. Verify that the HPTAPE and TAPEDRIVE sections are deleted.
E. Go to step one above.
POWER-MANAGEMENT (GREEN) COMPUTERS
If your computer has a power-management feature that shuts off
your computer after xx minutes since the last keyboard input...
you may experience problems with certain operations that exceed
the time limit.
Turn off the power-management feature when:
- running a long operation, such as formatting a tape
- running a full-system backup
- running a scheduled operation, such as an unattended
backup in the middle of the night
Check your computer's manual to find out how to turn off or
change the time limit of the power-management feature.